logologo

Language
Search...

logo

Products

Products

Home > Products > Electornic Components > Featured Manufacturers

Altera EP4CE10E22I7N

Altera's new Cyclone® IV FPGA device family extends the Cyclone FPGA seriesleadership in providing the market’s lowest-cost, lowest-power FPGAs, now with atransceiver variant. Cyclone IV devices are targeted to high-volume, cost-sensitiveapplications, enabling system designers to meet increasing bandwidth requirementswhile lowering costs.Built on an optimized low-power process, the Cyclone IV device family offers thefollowing two variants:

Description:

Altera's new Cyclone® IV FPGA device family extends the Cyclone FPGA seriesleadership in providing the market’s lowest-cost, lowest-power FPGAs, now with atransceiver variant. Cyclone IV devices are targeted to high-volume, cost-sensitiveapplications, enabling system designers to meet increasing bandwidth requirementswhile lowering costs.Built on an optimized low-power process, the Cyclone IV device family offers thefollowing two variants:

■ Cyclone IV E—lowest power, high functionality with the lowest cost

■ Cyclone IV GX—lowest power and lowest cost FPGAs with 3.125 Gbpstransceivers

Features:

The Cyclone IV device family offers the following features:

■ Low-cost, low-power FPGA fabric:

■ 6K to 150K logic elements

■ Up to 6.3 Mb of embedded memory

■ Up to 360 18 × 18 multipliers for DSP processing intensive applications

■ Protocol bridging applications for under 1.5 W total power

■ Cyclone IV GX devices offer up to eight high-speed transceivers that provide:

■ Data rates up to 3.125 Gbps

■ 8B/10B encoder/decoder

■ 8-bit or 10-bit physical media attachment (PMA) to physical coding sublayer(PCS) interface

■ Byte serializer/deserializer (SERDES)

■ Word aligner

■ Rate matching FIFO

■ TX bit slipper for Common Public Radio Interface (CPRI)

■ Electrical idle

■ Dynamic channel reconfiguration allowing you to change data rates andprotocols on-the-fly

■ Static equalization and pre-emphasis for superior signal integrity

■ 150 mW per channel power consumption

■ Flexible clocking structure to support multiple protocols in a single transceiverblock

■ Cyclone IV GX devices offer dedicated hard IP for PCI Express (PIPE) (PCIe)Gen 1:

■ ×1, ×2, and ×4 lane configurations

■ End-point and root-port configurations

■ Up to 256-byte payload

■ One virtual channel

■ 2 KB retry buffer

■ 4 KB receiver (Rx) buffer

■ Cyclone IV GX devices offer a wide range of protocol support:

■ PCIe (PIPE) Gen 1 ×1, ×2, and ×4 (2.5 Gbps)

■ Gigabit Ethernet (1.25 Gbps)

■ CPRI (up to 3.072 Gbps)

■ XAUI (3.125 Gbps)

■ Triple rate serial digital interface (SDI) (up to 2.97 Gbps)

■ Serial RapidIO (3.125 Gbps)

■ Basic mode (up to 3.125 Gbps)

■ V-by-One (up to 3.0 Gbps)

■ DisplayPort (2.7 Gbps)

■ Serial Advanced Technology Attachment (SATA) (up to 3.0 Gbps)

■ OBSAI (up to 3.072 Gbps)

■ Up to 532 user I/Os

■ LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx

■ Support for DDR2 SDRAM interfaces up to 200 MHz

■ Support for QDRII SRAM and DDR SDRAM up to 167 MHz

■ Up to eight phase-locked loops (PLLs) per device

■ Offered in commercial and industrial temperature grades


How to Order

You can get your Altera EP4CE10E22I7N solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP