Features:

■ USB 2.0 USB IF Hi-Speed certified (TID # 40460272)

■ Single-chip integrated USB 2.0 transceiver, smart SIE, andenhanced 8051 microprocessor

■ Fit-, form-, and function-compatible with the FX2

❐ Pin-compatible0

❐ Object-code-compatible

❐ Functionally compatible (FX2LP is a superset)

■ Ultra-low power: ICC no more than 85 mA in any mode

❐ Ideal for bus- and battery-powered applications

■ Software: 8051 code runs from:

❐ Internal RAM, which is downloaded through USB

❐ Internal RAM, which is loaded from EEPROM

❐ External memory device (128-pin package)

■ 16 KB of on-chip code/data RAM

■ Four programmable BULK, INTERRUPT, andISOCHRONOUS endpoints

❐ Buffering options: Double, triple, and quad

■ Additional programmable (BULK/INTERRUPT) 64-byteendpoint

■ 8-bit or 16-bit external data interface

■ Smart media standard ECC generation

■ GPIF™ (general programmable interface)

❐ Enables direct connection to most parallel interfaces

❐ Programmable waveform descriptors and configurationregisters to define waveforms

❐ Supports multiple ready (RDY) inputs and control (CTL)outputs

■ Integrated, industry-standard, enhanced 8051

❐ 48-MHz, 24-MHz, or 12-MHz CPU operation

❐ Four clocks per instruction cycle

❐ Two USARTs

❐ Three counter/timers

❐ Expanded interrupt system

❐ Two data pointers

■ 3.3-V operation with 5-V tolerant inputs

■ Vectored USB interrupts and GPIF/FIFO interrupts

■ Separate data buffers for the setup and data portions of aCONTROL transfer

■ Integrated I2C controller; runs at 100 or 400 kHz[1]

■ Four integrated FIFOs

❐ Integrated glue logic and FIFOs lower system cost

❐ Automatic conversion to and from 16-bit buses

❐ Master or slave operation

❐ Uses external clock or asynchronous strobes

❐ Easy interface to ASIC and DSP ICs

■ Available in commercial and industrial temperature grades (allpackages except VFBGA)Features (CY7C68013A/14A only)

■ CY7C68014A: Ideal for battery-powered applications

❐ Suspend current: 100 A (typ)

■ CY7C68013A: Ideal for nonbattery-powered applications

❐ Suspend current: 300 A (typ)

■ Available in five Pb-free packages with up to 40 GPIOs

❐ 128-pin TQFP (40 GPIOs), 100-pin TQFP (40 GPIOs), 56-pinQFN (24 GPIOs), 56-pin SSOP (24 GPIOs), and 56-pinVFBGA (24 GPIOs)Features (CY7C68015A/16A only)

■ CY7C68016A: Ideal for battery-powered applications

❐ Suspend current: 100 A (typ)

■ CY7C68015A: Ideal for nonbattery-powered applications

❐ Suspend current: 300 A (typ)

■ Available in Pb-free 56-pin QFN package (26 GPIOs)

■ Two more GPIOs than CY7C68013A/14A enabling additionalfeatures in the same footprint