Features:

• Open NAND Flash Interface (ONFI) 1.0-compliant1

• Single-level cell (SLC) technology

• Organization

– Page size x8: 2176 bytes (2048 + 128 bytes)

– Block size: 64 pages (128K + 8K bytes)

– Plane size: 2 planes x 1024 blocks per plane

– Device size: 2Gb: 2048 blocks

• Asynchronous I/O performance

–tRC/tWC: 20ns/20ns (3.3V), 30ns/30ns (1.8V)

• Array performance

– Read page: 25µs

– Program page: 200µs (TYP, 3.3V/1.8V)

– Erase block: 2ms (TYP)

• Command set: ONFI NAND Flash Protocol

• Advanced command set

– Program page cache mode

– Read page cache mode

– Permanent block locking (blocks 47:0)

– One-time programmable (OTP) mode

– Block lock

– Programmable drive strength

– Two-plane commands (Available with ECC offonly)

– Read unique ID

– Internal data move

• Operation status byte provides software method fordetecting

– Operation completion

– Pass/Fail condition

– Write-protect status

• Ready/Busy# (R/B#) signal provides a hardwaremethod of detecting operation completion

• WP# signal: Write protect entire device

• Blocks 7-0 are valid when shipped from factory withECC. For minimum required ECC, see Error Management.

• RESET (FFh) required as first command after power-on

• Alternate method of device initialization after power-up (contact factory)

• Internal data move operations supported within theplane from which data is read

• Quality and reliability

– Endurance: 100,000 PROGRAM/ERASE cycles

– Data retention: JESD47G-compliant; see qualification report

– Additional: Uncycled data retention: 10 years24/7 @ 85°C

• Operating voltage range

– VCC: 2.7–3.6V

– VCC: 1.7–1.95V

• Operating temperature:

– Industrial (IT): –40°C to +85°C

• Package

– 48-pin TSOP type 1, CPL2

– 63-ball VFBGA