Low-Power Features:

ï Power-Managed modes:

- Run: CPU on, peripherals on

- Idle: CPU off, peripherals on

- Sleep: CPU off, peripherals off

ï Power Consumption modes:

- PRI_RUN: 150 μA, 1 MHz, 2V

- PRI_IDLE: 37 μA, 1 MHz, 2V

- SEC_RUN: 14 μA, 32 kHz, 2V

- SEC_IDLE: 5.8 μA, 32 kHz, 2V

- RC_RUN: 110 μA, 1 MHz, 2V

- RC_IDLE: 52 μA, 1 MHz, 2V

- Sleep: 0.1 μA, 1 MHz, 2V

ï Timer1 Oscillator: 1.1 μA, 32 kHz, 2V

ï Watchdog Timer: 2.1 μA

ï Two-Speed Oscillator Start-up

Oscillators:

ï Four Crystal modes:

- LP, XT, HS: up to 25 MHz

- HSPLL: 4-10 MHz (16-40 MHz internal)

ï Two External RC modes, Up to 4 MHz

ï Two External Clock modes, Up to 40 MHz

ï Internal Oscillator Block:

- 8 user-selectable frequencies: 31 kHz, 125 kHz,250 kHz, 500 kHz, 1 MHz, 2 MHz, 4 MHz, 8 MHz

- 125 kHz-8 MHz calibrated to 1%

- Two modes select one or two I/O pins

- OSCTUNE ñ Allows user to shift frequency

ï Secondary Oscillator using Timer1 @ 32 kHz

ï Fail-Safe Clock Monitor

- Allows for safe shutdown if peripheral clock stops

Peripheral Highlights:

ï High-Current Sink/Source 25 mA/25 mA

ï Three External Interrupts

ï Up to 2 Capture/Compare/PWM (CCP) modules:

- Capture is 16-bit, max. resolution is 6.25 ns (TCY/16)

- Compare is 16-bit, max. resolution is 100 ns (TCY)

- PWM output: PWM resolution is 1 to 10-bit

ï Enhanced Capture/Compare/PWM (ECCP) module:

- One, two or four PWM outputs

- Selectable polarity

- Programmable dead time

- Auto-Shutdown and Auto-Restart

ï Compatible 10-Bit, Up to 13-ChannelAnalog-to-Digital Converter (A/D) module with

Programmable Acquisition Time

ï Dual Analog Comparatorsï Addressable USART module:

- RS-232 operation using internal oscillatorblock (no external crystal required)

Special Microcontroller Features:

ï 100,000 Erase/Write Cycle Enhanced Flash ProgramMemory Typical

ï 1,000,000 Erase/Write Cycle Data EEPROMMemory Typical

ï Flash/Data EEPROM Retention: > 40 Years

ï Self-Programmable under Software Control

ï Priority Levels for Interrupts

ï 8 x 8 Single-Cycle Hardware Multiplier

ï Extended Watchdog Timer (WDT):

- Programmable period from 41 ms to 131s

- 2% stability over VDD and Temperature

ï Single-Supply 5V In-Circuit Serial Programmingô(ICSPô) via Two Pins

ï In-Circuit Debug (ICD) via Two Pins

ï Wide Operating Voltage Range: 2.0V to 5.5V