Description:

The L6362A is an IO-Link and SIO modetransceiver device compliant to PHY2 (3-wireconnection) supporting COM1 (4.8 kbaud),COM2 (38.4 kbaud) and COM3 (230.4 kbaud)modes. The output stage can be configured ashigh-side, low-side or push-pull and it can driveresistive, capacitive and inductive loads. It can beconnected to a sensor chip with the industrial 24V environment. The industrial environment couldbe a PLC, an IO-Link master, a relay or a valve.The L6362A is protected against reverse polarity,among VCC, GND, OUTH, OUTL and I/Q pins.Furthermore, the IC is protected against outputshort-circuit, overvoltage and impulse voltagewithstand (±1 kV pulse amplitude,1.2/50 μs pulseduration, 500 Ω source impedance).

Features:

 Supply voltage from 7 V to 36 V

 5 V and 3.3 V compatible I/Os

 5 V or 3.3 V, 10 mA selectable linearregulator

 0.3 A output current intervention threshold

 Fully protected

 Reverse polarity

 Overload with cut-off function

 Overtemperature

 Undervoltage and overvoltage

 GND and VCC open wire

 -40 to +125 °C operating ambienttemperature

 Selectable output stages: high-side, lowside, push-pull

 Suitable to drive L, C and R loads

 30 μF output load drive capability

 Switching capability of inductors up to 500mJ

 Wake-up detection supported

 Fast demagnetization of inductive loads

 COM1, COM2 and COM3 mode supported

 Designed to meet:

 Burst IEC 61000-4-4 

 ESD IEC 61000-4-2

 Surge EN60947-5-2

 Miniaturized VFDFPN 12L (3x3x0.90 mm)package

Applications:

 Industrial sensors

 Factory automation

 Process control