INTRODUCTION：

FORESEE eMMC is an embedded stoage solution designed in the BGA package. The FORESEE eMMC consists of NAND flash and eMMC controller. The controller could manage the interface protocols, wear-leveling, bad block management andECC.FORESEE eMMC has high performance at a competitive cost, high quality and low power consumption,and eMMC is compatible with JEDEC stardard eMMC 5.1 specifications.

KEY FEATURES：

eMMC5.1 specification compatibility

- Backward compatible to eMMC4.41/4.5/5.0

·Bus mode

- Data bus width: 1 bit (default), 4 bits, 8 bits

- Data transfer rate: up to 400MB/s (HS400)

- MMC 1/F Clock frequency: 0~200MHz

. Operating voltage range-Vcc(NAND):2.7~ 3.6V

- Vcco(Controller):1.7 ~ 1.95V /2.7 ~ 3.6V

 Temperature

- Operation: -40℃ ~ +85℃

- Storage without operation: -40℃ ~ +85℃

 Sudden-Power-Loss safeguard

 Hardware ECC engine

Unique firmware backup mechanism

Global-wear-leveling

Supported features.

- HS400, HS200

- Partitioning, RPMB

- Boot feature, boot partition

- HW Reset/SW Reset

- Discard, Trim, Erase, Sanitize

- Background operations, HPI

- Enhanced reliable write

- S.M.A.R.T. Health Report

-FFU

- Sleep / awake

 Others- Compliance with the RoHS Directive