Features：

• Core: ARM® 32-bit Cortex®-M0 CPU,frequency up to 48 MHz

• Memories– 64 to 128 Kbytes of Flash memory– 16 Kbytes of SRAM with HW parity

• CRC calculation unit

• Reset and power management

– Digital and I/O supply: VDD = 2.0 V to 3.6 V

– Analog supply: VDDA = VDD to 3.6 V

– Selected I/Os: VDDIO2 = 1.65 V to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Programmable voltage detector (PVD)

– Low power modes: Sleep, Stop, Standby

– VBAT supply for RTC and backup registers

• Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC with x6 PLL option

– Internal 40 kHz RC oscillator

– Internal 48 MHz oscillator with automatictrimming based on ext. synchronization

• Up to 87 fast I/Os

– All mappable on external interrupt vectors

– Up to 68 I/Os with 5V tolerant capabilityand 19 with independent supply VDDIO2

• Seven-channel DMA controller

• One 12-bit, 1.0 µs ADC (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Separate analog supply: 2.4 V to 3.6 V

• One 12-bit D/A converter (with 2 channels)

• Two fast low-power analog comparators withprogrammable input and output

• Up to 24 capacitive sensing channels fortouchkey, linear and rotary touch sensors

• Calendar RTC with alarm and periodic wakeupfrom Stop/Standby

• 12 timers

– One 16-bit advanced-control timer forsix-channel PWM output

– One 32-bit and seven 16-bit timers, with upto four IC/OC, OCN, usable for IR controldecoding or DAC control

– Independent and system watchdog timers

– SysTick timer

• Communication interfaces

– Two I2C interfaces supporting Fast ModePlus (1 Mbit/s) with 20 mA current sink; onesupporting SMBus/PMBus and wakeup

– Four USARTs supporting mastersynchronous SPI and modem control; twowith ISO7816 interface, LIN, IrDA, autobaud rate detection and wakeup feature

– Two SPIs (18 Mbit/s) with 4 to 16programmable bit frames, and with I2Sinterface multiplexed

– CAN interface

– USB 2.0 full-speed interface, able to runfrom internal 48 MHz oscillator and withBCD and LPM support

• HDMI CEC wakeup on header reception

• Serial wire debug (SWD)

• 96-bit unique ID

• All packages ECOPACK®2