logologo

Language
Search...

logo

Products

Products

Home > Products > ST MICROELECTRONICS > STM32

STMicroelectronics STM32F207VCT6

The STM32F207VCT6 is a high-performance microcontroller based on the ARM® Cortex®-M3 core, operating at up to 120 MHz. It incorporates the Adaptive Real-Time (ART) Accelerator™, enabling 0-wait state execution from Flash memory and delivering up to 150 DMIPS. With up to 1 MB of Flash memory, 128 KB of SRAM, 4 KB of backup SRAM, and 512 bytes of OTP memory, this device offers ample storage and flexibility. It features three 12-bit 0.5 µs ADCs capable of up to 6 MSPS in triple interleaved mode, two 12-bit DACs, a flexible static memory controller (FSMC) supporting external memories and LCD parallel interfaces, and up to 17 timers (including twelve 16-bit and two 32-bit timers). Advanced connectivity includes dual USB OTG controllers (full-speed with on-chip PHY and high-speed with ULPI), a 10/100 Ethernet MAC with IEEE 1588v2 hardware support, dual CAN interfaces, up to six USART/UARTs, three SPIs with I²S multiplexed, an SDIO interface, and an 8- to 14-bit parallel camera interface.

Features:

• Core: ARM® 32-bit Cortex®-M3 CPU (120 MHzmax) with Adaptive real-time accelerator (ARTAccelerator™ allowing 0-wait state executionperformance from Flash memory, MPU,150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)• Memories

– Up to 1 Mbyte of Flash memory

– 512 bytes of OTP memory

– Up to 128 + 4 Kbytes of SRAM

– Flexible static memory controller thatsupports Compact Flash, SRAM, PSRAM,NOR and NAND memories

– LCD parallel interface, 8080/6800 modes

• Clock, reset and supply management

– From 1.8 to 3.6 V application supply+I/Os

– POR, PDR, PVD and BOR

– 4 to 26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

• Low-power modes

– Sleep, Stop and Standby modes

– VBAT supply for RTC, 20 × 32 bit backupregisters, and optional 4 KB backup SRAM

• 3 × 12-bit, 0.5 µs ADCs with up to 24 channelsand up to 6 MSPS in triple interleaved mode

• 2 × 12-bit D/A converters

• General-purpose DMA: 16-stream controllerwith centralized FIFOs and burst support

• Up to 17 timers

– Up to twelve 16-bit and two 32-bit timers,up to 120 MHz, each with up to 4IC/OC/PWM or pulse counter andquadrature (incremental) encoder input

• Debug mode: Serial wire debug (SWD), JTAG,and Cortex-M3 Embedded Trace Macrocell™

• Up to 140 I/O ports with interrupt capability:

– Up to 136 fast I/Os up to 60 MHz

– Up to 138 5 V-tolerant I/Os

• Up to 15 communication interfaces

– Up to 3 × I2C interfaces (SMBus/PMBus)

– Up to 4 USARTs and 2 UARTs (7.5 Mbit/s,ISO 7816 interface, LIN, IrDA, modem ctrl)

– Up to 3 SPIs (30 Mbit/s), 2 with muxed I2Sto achieve audio class accuracy via audioPLL or external PLL

– 2 × CAN interfaces (2.0B Active)

– SDIO interface

• Advanced connectivity

– USB 2.0 full-speed device/host/OTGcontroller with on-chip PHY

– USB 2.0 high-speed/full-speeddevice/host/OTG controller with dedicatedDMA, on-chip full-speed PHY and ULPI

– 10/100 Ethernet MAC with dedicated DMA:supports IEEE 1588v2 hardware, MII/RMII

• 8- to 14-bit parallel camera interface(48 Mbyte/s max.)

• CRC calculation unit

• 96-bit unique ID


How to Order

You can get your STMicroelectronics STM32F207VCT6 solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP