logologo

Language
Search...

logo

Products

Products

Home > Products > ST MICROELECTRONICS > STM32

STMicroelectronics STM32F373CCT6

The STMicroelectronics STM32F373CCT6 is a mixed-signal microcontroller built around an Arm® Cortex®-M4 core with a Floating-Point Unit (FPU), operating at up to 72 MHz. It delivers 1.25 DMIPS/MHz, supporting DSP instructions and a Memory Protection Unit (MPU) for enhanced robustness. The device offers up to 256 Kbytes of Flash memory and 32 Kbytes of SRAM with hardware parity check. Designed for high-precision analog-intensive applications, the STM32F373CCT6 integrates three 16-bit sigma-delta analog-to-digital converters (ADCs) supporting up to 21 single-ended or 11 differential channels, a 12-bit 1.0 µs ADC with up to 16 channels, and three 12-bit digital-to-analog converter (DAC) channels. Additional analog features include two fast rail-to-rail comparators. The device provides extensive connectivity with USB 2.0 full speed, CAN, three USARTs, three SPIs (with I2S multiplexing), two I2C Fast Mode Plus interfaces, and an HDMI-CEC bus. Operating across a 2.0 V to 3.6 V supply range,

Features:

• Core: ARM® 32-bit Cortex®-M4 CPU (72 MHzmax), single-cycle multiplication and HWdivision, DSP instruction with FPU (floatingpoint unit) and MPU (memory protection unit)

• 1.25 DMIPS/MHz (Dhrystone 2.1)

• Memories

– 64 to 256 Kbytes of Flash memory

– 32 Kbytes of SRAM with HW parity check

• CRC calculation unit

• Reset and power management

– Voltage range: 2.0 to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Programmable voltage detector (PVD)

– Low power modes: Sleep, Stop, Standby

– VBAT supply for RTC and backup registers

• Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC with x16 PLL option

– Internal 40 kHz oscillator

• Up to 84 fast I/Os

– All mappable on external interrupt vectors

– Up to 45 I/Os with 5 V tolerant capability

• 12-channel DMA controller

• One 12-bit, 1.0 µs ADC (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Separate analog supply from 2.4 up to 3.6

• Three 16-bit Sigma Delta ADC

– Separate analog supply from 2.2 to 3.6 V,up to 21 single/ 11 diff channels

• Three 12-bit DAC channels

• Two fast rail-to-rail analog comparators withprogrammable input and output

• Up to 24 capacitive sensing channels

• 17 timers

– Two 32-bit timers and three 16-bit timerswith up to 4 IC/OC/PWM or pulse counters

– Two 16-bit timers with up to 2 IC/OC/PWMor pulse counters

– Four 16-bit timers with up to 1 IC/OC/PWMor pulse counter

– Independent and system watchdog timers

– SysTick timer: 24-bit down counter

– Three 16-bit basic timers to drive the DAC

• Calendar RTC with Alarm and periodic wakeupfrom Stop/Standby

• Communication interfaces

– CAN interface (2.0B Active)

– Two I2Cs supporting Fast Mode Plus(1 Mbit/s) with 20 mA current sink,SMBus/PMBus, wakeup from STOP

– Three USARTs supporting synchronousmode, modem control, ISO/IEC 7816, LIN,IrDA, auto baud rate, wakeup feature

– Three SPIs (18 Mbit/s) with 4 to 16programmable bit frames, muxed I2S

– HDMI-CEC bus interface

– USB 2.0 full speed interface

• Serial wire devices, JTAG, Cortex®-M4 ETM

• 96-bit unique ID



How to Order

You can get your STMicroelectronics STM32F373CCT6 solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP