GENERAL DESCRIPTION:

The ADM2682E/ADM2687E are fully integrated 5 kV rms signaland power isolated data transceivers with ±15 kV ESD protectionand are suitable for high speed communication on multipoint transmission lines. The ADM2682E/ADM2687E include an integrated 5kV rms isolated dc-to-dc power supply that eliminates the need foran external dc-to-dc isolation block.They are designed for balanced transmission lines and comply withANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E).The devices integrate Analog Devices, Inc., iCoupler® technologyto combine a 3-channel isolator, a three-state differential line driver,a differential input receiver, and Analog Devices isoPower® dc-to-dcconverter into a single package. The devices are powered by asingle 5 V or 3.3 V supply, realizing a fully integrated signal andpower isolated RS-485 solution.

The ADM2682E/ADM2687E drivers have an active high enable.An active low receiver enable is also provided, which causes the receiver output to enter a high impedance state when disabled.The devices have current limiting and thermal shutdown features to protect against output short circuits and situations where bus contention may cause excessive power dissipation. The parts are fully specified over the industrial temperature range and are available in a highly integrated, 16-lead, wide-body SOIC package with >8 mm creepage and clearance. The ADM2682E/ADM2687E contain isoPower technology that uses high frequency switching elements to transfer power through the transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. Refer to AN-0971 Application Note, Recommendations for Control of Radiated Emissions with isoPower Devices, for details on board layout considerations.

FEATURES:

► 5 kV rms isolated RS-485/RS-422 transceiver, configurable as

half or full duplex

► isoPower integrated isolated dc-to-dc converter

► ±15 kV ESD protection on RS-485 input/output pins

► Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E)

► Data rate: 16 Mbps (ADM2682E), 500 kbps (ADM2687E)

► 5 V or 3.3 V operation

► Connect up to 256 nodes on one bus

► Open- and short-circuit, fail-safe receiver inputs

► High common-mode transient immunity: >25 kV/µs

► Thermal shutdown protection

► Safety and regulatory approvals

► UL 1577

► VISO = 5000 V rms for 1 minute

► IEC/CSA 62368-1

► IEC/CSA 60601-1

► IEC/CSA 61010-1

► CQC GB 4943.1

► DIN EN IEC 60747-17 (VDE 0884-17) (Pending)

► VIORM = 846 V peak

► Operating temperature range: −40°C to +85°C

► 16-lead wide-body SOIC with >8 mm creepage and clearance

APPLICATIONS:

► Isolated RS-485/RS-422 interfaces

► Industrial field networks

► Multipoint data transmission systems