logologo

Language
Search...

logo

Products

Products

Home > Products > Featured Manufacturers > Fremont Micro Devices

FMD FT32F113CBAT7

The FT32F113xx uses a high-performance ARM Cortex-M3 32-bit RISC core with a maximum operating frequency of 72MHz. Built-in high-speed memory (up to 128K bytes of flash and 20K bytes of SRAM) and rich enhanced I/O ports. The chip offers rich peripherals, including 2 I2C interfaces, 2 SPI interfaces, 3 USART interfaces, 1 USB interface, 1 CAN, 2 12-bit ADC, up to 7 timers (1 advanced, 3 general, 2 Watchdog, and 1 system). Three low power modes guarantee the requirements of low power applications. Support SWD and JTAG interface debugging, 2 watchpoints and 6 hardware breakpoints for easy debugging.

Product introduction:The FT32F113xx uses a high-performance ARM Cortex-M3 32-bit RISC core with a maximum operating frequency of 72MHz. Built-in high-speed memory (up to 128K bytes of flash and 20K bytes of SRAM) and rich enhanced I/O ports. The chip offers rich peripherals, including 2 I2C interfaces, 2 SPI interfaces, 3 USART interfaces, 1 USB interface, 1 CAN, 2 12-bit ADC, up to 7 timers (1 advanced, 3 general, 2 Watchdog, and 1 system). Three low power modes guarantee the requirements of low power applications. Support SWD and JTAG interface debugging, 2 watchpoints and 6 hardware breakpoints for easy debugging.Application areas:Medical equipment, PC peripherals, industrial control, intelligent instruments, home appliances, etc.CPU characteristics:l  Operating voltage: 1.8V~5.0Vl  Operating temperature range: -40℃~105℃l  RISC core based on ARM Cortex-M3 32-bitü  32-bit hardware multiplier with single instruction cycleü  NVIC with 60 interrupt vectors, 16 kinds of priorityü  Support for SWD interface debugging, 2 watchpoints and 6 hardware breakpointsl  Memory architectureü  Flash program memory: 128KBü  Data RAM: 20KBl  3 Low power modes: Sleep/Stop/StandbyPeripheral characteristics:l  Clock sourceü  Built-in 8MHz oscillatorü  Built in 40kHz low frequency oscillatorü  Support 4MHz-16MHz crystal and external clock inputü  Support 32 kHz low frequency crystal and support for hardware calibrationü  Crystal clock missing detectionü  Programmable PLL with up to 72MHz frequency doublingl  37/51/80 high speed IOl  1 programmable 7-channel DMA controllerl  CRC module for programmable polynomialsl  2 12-bit ADCsü  16 external channelsü  Internal channels: temperature sensor, internal voltage referencel  Real-time clock and calendar RTC moduleü  Support intrusion detection, alarm clock and periodic wake upl  Timerü  TIM1-16bit, 4-channel PWM, supports dead zone control and emergency braking functionü  TIM2/TIM3/ TIM4-16bit, 4 independent channels support input capture, output comparison, PWM and pulse counting and other functionsü  2 watchdogs: WWDG and IWDGü  1 24-bit system timerl  Communication interfaceü  2 I2C, where I2C1 supports SMBus/PMBusü  2 SPI with a maximum transfer speed of 18Mbpsü  3 USART, support ISO7816, LIN, IrDA, Modem control functionü  1 USB, support 2.0 full speed protocolü  1 CAN 2.0B

How to Order

You can get your FMD FT32F113CBAT7 solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP