Description：

The devices are single channel high-side drivers manufactured using ST proprietaryVIPower M0-7 technology and housed in PowerSSO-16 and SO-8 packages. The devices are designed to drive 12 V automotive grounded loads through a 3 V and 5 VCMOS-compatible interface, and to provide protection and diagnostics.The devices integrate advanced protective functions such as load current limitation,overload active management by power limitation and overtemperature shutdown withconfigurable latch-off.A FaultRST pin unlatches the output in case of fault or disables the latch-offfunctionality.A dedicated multifunction multiplexed analog output pin delivers sophisticateddiagnostic functions including high precision proportional load current sense, supplyvoltage feedback and chip temperature sense, in addition to the detection of overloadand short circuit to ground, short to VCC and OFF-state open-load.A sense enable pin allows OFF-state diagnosis to be disabled during the module lowpower mode as well as external sense resistor sharing among similar devices.

Features：

• AEC-Q100 qualified

• General

– Single channel smart high-side driver with MultiSense analog feedback

– Very low standby current

– Compatible with 3 V and 5 V CMOS outputs

• MultiSense diagnostic functions

– Multiplexed analog feedback of: load current with high precisionproportional current mirror, VCC supply voltage and TCHIP devicetemperature

– Overload and short to ground (power limitation) indication

– Thermal shutdown indication

– OFF-state open-load detection

– Output short to VCC detection

– Sense enable/disable

• Protections

– Undervoltage shutdown

– Overvoltage clamp

– Load current limitation

– Self limiting of fast thermal transients

– Configurable latch-off on overtemperature or power limitation withdedicated fault reset pin

– Loss of ground and loss of VCC

– Reverse battery with external components

– Electrostatic discharge protection

Applications：

• All types of automotive resistive, inductive and capacitive loads

• Specially intended for automotive signal lamps (up to R10W or LED RearCombinations)

• Protected supply for ADAS systems: radars and sensors