logologo

Language
Search...

logo

Products

Products

Home > Products > ST MICROELECTRONICS > STM32

STMicroelectronics STM32F401RET6

The STM32F401RET6 is a high-performance microcontroller from STMicroelectronics based on the ARM® 32-bit Cortex®-M4 core with a Floating Point Unit (FPU). Operating at a frequency of up to 84 MHz, it delivers 105 DMIPS and features the Adaptive Real-Time Accelerator (ART Accelerator™) for 0-wait state execution from Flash memory. The device offers extensive memory integration with up to 512 Kbytes of Flash memory and 96 Kbytes of SRAM. It is equipped with a rich set of peripherals including a 12-bit ADC, a 16-stream DMA controller with FIFO and burst support, up to 11 timers, and versatile communication interfaces such as USB 2.0 OTG with on-chip PHY, up to 4 SPIs (with I2S audio capability), 3 USARTs, 3 I2C interfaces, and an SDIO interface. With a wide operating voltage range of 1.7 V to 3.6 V, multiple low-power modes, and 5 V-tolerant I/Os, the STM32F401RET6 is ideal for industrial control, consumer electronics, and connectivity applications requiring high processing efficiency and

Features:

• Core: ARM® 32-bit Cortex®-M4 CPU withFPU, Adaptive real-time accelerator (ARTAccelerator™) allowing 0-wait state executionfrom Flash memory, frequency up to 84 MHz,memory protection unit,105 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1),and DSP instructions

• Memories

– up to 512 Kbytes of Flash memory

– up to 96 Kbytes of SRAM

• Clock, reset and supply management

– 1.7 V to 3.6 V application supply and I/Os

– POR, PDR, PVD and BOR

– 4-to-26 MHz crystal oscillator

– Internal 16 MHz factory-trimmed RC

– 32 kHz oscillator for RTC with calibration

– Internal 32 kHz RC with calibration

• Power consumption

– Run: 146 µA/MHz (peripheral off)

– Stop (Flash in Stop mode, fast wakeuptime): 42 µA Typ @ 25C; 65 µA max@25 °C

– Stop (Flash in Deep power down mode,fast wakeup time): down to 10 µA @ 25 °C;30 µA max @25 °C

– Standby: 2.4 µA @25 °C / 1.7 V withoutRTC; 12 µA @85 °C @1.7 V

– VBAT supply for RTC: 1 µA @25 °C

• 1×12-bit, 2.4 MSPS A/D converter: up to 16channels

• General-purpose DMA: 16-stream DMAcontrollers with FIFOs and burst support

• Up to 11 timers: up to six 16-bit, two 32-bittimers up to 84 MHz, each with up to fourIC/OC/PWM or pulse counter and quadrature(incremental) encoder input, two watchdogtimers (independent and window) and aSysTick timer

• Debug mode

– Serial wire debug (SWD) & JTAGinterfaces

– Cortex®-M4 Embedded Trace Macrocell™

• Up to 81 I/O ports with interrupt capability

– Up to 78 fast I/Os up to 42 MHz

– All I/O ports are 5 V-tolerant

• Up to 12 communication interfaces

– Up to 3 x I2C interfaces (SMBus/PMBus)

– Up to 3 USARTs (2 x 10.5 Mbit/s,1 x 5.25 Mbit/s), ISO 7816 interface, LIN,IrDA, modem control)

– Up to 4 SPIs (up to 42Mbit/s atfCPU = 84 MHz), SPI2 and SPI3 with muxedfull-duplex I2S to achieve audio classaccuracy via internal audio PLL or externalclock

– SDIO interface

– Advanced connectivity: USB 2.0 full-speeddevice/host/OTG controller with on-chipPHY

• CRC calculation unit

• 96-bit unique ID

• RTC: subsecond accuracy, hardware calendar

• All packages (WLCSP49, LQFP64/100,UFQFPN48, UFBGA100) are ECOPACK®2


How to Order

You can get your STMicroelectronics STM32F401RET6 solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP